Radiant's near-infrared (NIR) measurement solutions help ensure the accuracy of NIR emitters used for facial & gesture recognition and other 3D sensing applications. NIR light covers wavelengths of the electromagnetic spectrum from approximately 750 to 2500 nanometers (nm), which is beyond human visual perception. NIR-based sensing  provides machines with information about objects in the physical environment. When NIR light is emitted and reflected off of an object, an NIR sensor receives the reflected light or light pattern to gauge the distance, size, location, and identifying features of objects in the three-dimensional world.

NIR light is ideal for 3D sensing applications because it is invisible to the human eye, making it unnoticeable when cast into a user’s face, eyes, or environment. Proper filtering can remove the visible light spectrum for NIR sensing devices, increasing reliability for sensing in ambient light conditions or poor visibility conditions like rain or fog. However, because the human eye does not respond to NIR light, it is important to measure the emissions from NIR LEDs and lasers that will be used for 3D sensing of humans and their environments.

Users of Radiant NIR measurement systems benefit from turnkey solutions combining high-resolution imaging radiometers, optical components, and software test libraries for common analyses. Software tests in Radiant’s TrueTest Software platform include pass/fail parameters and custom output, and can be run in sequence to efficiently characterize and qualify light sources used for facial & gesture recognition, eye tracking, and other NIR-based 3D sensing applications.

Explore Solutions:


Near-Infrared Light Spectrum

The NIR range covers approximately 750 to 2500 nanometers of the electromagnetic spectrum, which is outside of the visible light spectrum for human vision.

NIR Applications

Common 3D Sensing Applications


Gesture Recognition


Eye Tracking


Automotive Lidar


Facial Recognition


NIR Applications by Wavelength


- 780 nm Eye Tracking
- 850 nm Night Vision, Security Cameras
- 905 nm Short-range Automotive Lidar (ADAS, Autonomous Vehicles)
- 940 nm Facial, Gesture Recognition
- 1040-1060 nm Terrestrial Mapping, Lidar Systems
- 1550 nm Long-range Automotive Lidar (ADAS, Autonomous Vehicles)



Types of NIR Emitters


  • Light sources used in NIR “flood” illumination
  • Light sources used in short-range proximity and time-of-flight (ToF) applications


  • Light sources used to create structured light patterns (sometimes called “dot patterns”) produced by diffractive optical elements (DOE)
  • Light sources used in long-range proximity sensing and ToF applications

Industry Standards

Safety standards governing NIR light sources include:

Radiant’s near-IR measurement solutions characterize the output of NIR sources, providing manufacturers with data that may be useful when testing to these standards.



Near-infrared LEDs are used in devices from remote controls and facial recognition systems to security cameras and medical instruments. LEDs are advantageous for NIR sensing because they cast a wide distribution of  light, covering a large field of view without gaps in 3D spatial sensing area.


Angular Distribution Measurement

Because NIR emissions can be dangerous to human vision, all angular distribution points of an NIR source must be measured. Missing any point during measurement may mean missing an irregularly strong emission that could prove hazardous to the user, especially over time.

Typically, a system called a goniometer is employed to rotate an NIR light source in front of a photodetector or a camera to capture 2D images of emissions to evaluate radiant intensity at each angle (measured in watts per steradian, W/sr). This process is time-consuming, requiring thousands of rotations to capture a complete angular measurement.

Alternatively, a radiometric camera combined with Fourier optics captures angular emission data from a single point, eliminating the need to rotate the device. The NIR Intensity Lens solution from Radiant combines a Fourier-optic lens with a 16-megapixel imaging radiometer to capture 3D light emissions across ±70 degrees in a single 2D polar measurement, with accuracy to 0.05 degrees per sensor pixel. This compact system reduces the cost and complexity typically required by goniometers to measure angular light distributions.


Polar plot and cross section showing radiant intensity (as a function of angle) of an NIR LED, captured by the Radiant NIR Intensity Lens and analyzed in TT-NIRI Software.

“Flood” Source Analysis

Object sensing may rely on a strong flash of NIR light (sometimes referred to as “flood” distribution) used to detect the presence the object and determine distance, even in darkness. These functions are commonly used in facial recognition to determine the distance of a face, which allows the device to accurately calculate facial curvature based on deformations of received NIR light reflections.

Time-of-flight (ToF) methods measure the distance between a device and an object based on the time difference between the emission of a signal (such as an NIR flood pulse) and when the signal’s reflection is received by the sensor. NIR light is particularly effective for ToF measurement because it can be separated from ambient light, reducing signal disturbance and improving accuracy in low light or nighttime conditions. In facial recognition applications, ToF provides highly accurate depth and spatial measurement.

Like all NIR emissions; emissions used for ToF functions must be tested to ensure they adhere to defined performance parameters. Irregularities such as hot spots or a fall-off of intensity around the perimeter of the distribution need to be identified and corrected to ensure accurate proximity sensing by NIR sources.

Radiant’s NIR Lens solution provides Flood Source Analysis (distribution full width/half width), measuring the average power (intensity, maximum power, rising-edge, and falling-edge values).

Flood Source Analysis measurement for an NIR source shown in Radiant’s TT-NIRI Software module. Here, light is pulsed through a square diffuser to create a distribution with uniform intensity. The cross-section graph shows peaks of intensity and fall-off at the edges of the source’s emission pattern.


Near-IR Lasers

NIR emissions are also produced by vertical-cavity surface-emitting lasers (VCSELs) for applications such as optical fiber telecommunication, automotive lidar, and gesture or facial recognition. While NIR LEDs are typically less expensive, NIR lasers offer advantages that are driving their rapid adoption. NIR lasers are better at proximity sensing and autofocus; for example, they can be directed and reflected with greater precision for facial and hand-gesture recognition.

Because of its spatial coherence and focus, laser light can pass through small openings, making it easy to integrate and manipulate through diffractive optical elements (DOE). NIR lasers enable 3D imaging solutions with superior depth measurement and mapping capabilities, using structured light (light projected in a defined pattern) and ToF approaches for applications such as facial identification.


Structured Light Dot Pattern Analysis

To produce a structured light pattern, a single NIR laser emission is projected through an optical component called a diffractive optical element, or DOE. A DOE splits the laser into multiple emission points, which cast an array of tiny invisible dots in a grid onto a 3D object, such as a person’s face. When the light from each dot is reflected back from the object surface and received by the NIR sensor, the device calculates deformations in the pattern to determine the contours of the object. Effectively, the NIR structured light grid creates a “map” of an object’s 3D features. Structured light sensing is a common method used in biometric security such as facial recognition devices for smart phones and other protected devices or media.


The TT-NIRI Software module automatically identifies and counts each dot in a structured light pattern as a point of interest, outputting data on each dot such as inclination, azimuth, and radiant intensity (W/sr).

The TT-NIRI Software module automatically identifies and counts each dot in a structured light pattern as a point of interest, outputting data on each dot such as inclination, azimuth, and radiant intensity (W/sr).

Measuring patterns produced by DOE ensures accurate and safe sensing of a 3D object’s unique identifiable features. Each dot in a pattern must be accurately positioned and emitted with the intended radiant intensity to ensure it is properly reflected to a device’s NIR sensor and interpreted correctly to identify the individual.

Regardless of the structured light pattern or dot position, shape, or size, Radiant’s radiometric measurement solution automatically identifies points of interest for each dot and outputs data for each dot’s angle of location (azimuth, inclination), maximum intensity, uniformity, and flux. Full dot source analytics are reported in TT-NIRI Software, including maximum peak (strongest emitter) location at x,y, maximum peak inclination/azimuth, maximum peak average, maximum peak solid angle, number of pixels at maximum peak point, spot power uniformity (between dots), total flux, and DOE flux (subtracting the background peak).

radiant vision system wechat